1957-1960 Ford F-Series Trucks & Panels
Would you like to react to this message? Create an account in a few clicks or log in to continue.

1960 & 1957 Ford Panels

3 posters

Go down

1960 & 1957 Ford Panels Empty 1960 & 1957 Ford Panels

Post  Admin January 12th 2011, 9:15 pm

1960 & 1957 Ford Panels 2010_f16
1960 & 1957 Ford Panels 2010_f17
1960 & 1957 Ford Panels 2010_f18
Admin
Admin
Admin

Posts : 226
Join date : 2011-01-11
Age : 50
Location : Douglasville, GA

https://www.facebook.com/group.php?gid=225938273106

Back to top Go down

1960 & 1957 Ford Panels Empty Re: 1960 & 1957 Ford Panels

Post  57-60 ford truck addict January 13th 2011, 12:04 am

the white 1960 is mine. it is fully stock(except for the wheels). the '57 is jim mcfarlands. he lowered the roofline a total of 19 inches via channeling, chopping and lowering. these were the only 2 examples of '57 to '60 panels in the whole f100 supernationals show last year. stan.
57-60 ford truck addict
57-60 ford truck addict

Posts : 7
Join date : 2011-01-12
Age : 60
Location : columbus, ga.

Back to top Go down

1960 & 1957 Ford Panels Empty just bought stock 1960 ford panel truck

Post  tom March 11th 2011, 11:12 pm

im not mechanically inclined and the battery needs replaced not sure if it needs a 6 volt or 12 volt ? its a inline six, and has been sitting for 3 yrs. any help would be appreciated. Tom

tom
Guest


Back to top Go down

1960 & 1957 Ford Panels Empty 57 panel

Post  telefunkken March 12th 2011, 4:19 am

added 6'' to 79 bronco frame, 4'' susp. lift. swapped in a 460, c-6. all new up front(bearings,bushings,hubs,u-joints on front axle,u-joints on both driveshafts,brake lines,wheel cyl,) cab was pretty heavy-awkward but gantry held up fine. gittin ready to french in 59 caddy tail lights (two on each side) check it out. https://s1103.photobucket.com/albums/g464/lesterlilly/


Last edited by telefunkken on March 12th 2011, 4:21 am; edited 1 time in total (Reason for editing : spelling)

telefunkken

Posts : 1
Join date : 2011-01-23

Back to top Go down

1960 & 1957 Ford Panels Empty Should be a 12 Volt

Post  Admin March 12th 2011, 1:03 pm

tom wrote: im not mechanically inclined and the battery needs replaced not sure if it needs a 6 volt or 12 volt ? its a inline six, and has been sitting for 3 yrs. any help would be appreciated. Tom

Hello it should be a 12 Volt, you can take the old one to a auto parts store and they will give you the right one. I hope this helps, Bill
Admin
Admin
Admin

Posts : 226
Join date : 2011-01-11
Age : 50
Location : Douglasville, GA

https://www.facebook.com/group.php?gid=225938273106

Back to top Go down

1960 & 1957 Ford Panels Empty Re: 1960 & 1957 Ford Panels

Post  Sponsored content


Sponsored content


Back to top Go down

Back to top

- Similar topics

 
Permissions in this forum:
You cannot reply to topics in this forum